ACMA Power Harrow with Seeder & Packer Roller Tilling & Direct Planting in an Efficient Single Pass!

FOR 80-130HP TRACTORS

Heavy Duty Professional Series, 8'-2" & 10-0" Working Width ACMA 'R' Series, Cat 2 3-Point, PTO Powered Power Harrow
With XW (Extra-Wide) Packer Roller w/Hydraulic Adjustment For 'On-The-Fly' Working Depth Control - Quick Hitch Compatible!

POWER HARROW STANDARD FEATURES:

• ACMA Uses Heavy Duty Italian Made Gearboxes With Large Sumps For Cooler Operation & Longer Life!
• Multi-Speed Gearbox Works Together With Tractors Ground Speed: Accommodating Older Tractors With Limited Low Speed Capabilities, Accommodating Newer Tractors With Lower Speed Controls, Both Accommodating Various Ground Conditions, Enabling 'Single Pass Efficiency' By Combining The Ideal Ground Speed With Ideal Desired 'Single Pass Results'!
• 4) Following Gearbox 'Rotor Speed' Settings Are Available:
• Standard Configuration @540RPM with 4-Speeds:
• 155-174-195-218RPM's (Factory Set At Speed 3).
• Optional Configuration @1000RPM with Single Speed of 287RPM's.
• Upgrade Cost To 1000RPM Includes 1000RPM PTO Shaft.
• Gearbox Gears Can Be Positioned For Various Speeds Without Emptying The Gearbox Oil By Tipping Tiller/Gearbox Back 90°.
• Side Gear Drive System Is In An Oil Bath Gear Box.
• Double Layer Deck Top, Each At 3/16" Thick!
• Hydraulically Adjusted XW (Extra Wide) Packer Roller Provides Excellent Means of 'On-The-Fly' Depth Control (superior to skid shoes) & Also Provides Soil Conditioning! Hydraulic Adjust Kit Includes: Flow Control Valve & Premium Hoses (US Or Euro Made!) With Spiral Guard Hose Protection!
• Rotor 'Counter Flange Kit' Is Another Standard Feature, Minimizing Blade & Bolt Breakage In The Toughest & Rockiest Ground Conditions!
• Rotor's 'End Flanges' Have One Straight Blade Each To Ensure Maximum Working Width & Minimizing Vegetation Wrapping On The Rotor Ends!
• Multi-Position, Adjustable Rear Gates With Adjustable Built-In Shock Absorption:
• Super Duty Rear Gates Are Durable Enough To Use For Finish Grading & Are Mechanically Linked To The 'Hydraulically Controlled Rear Roller' To Follow The 'On-The-Fly' Working Depth Positioning!
• Wing Plates On Outside Corners Of Rear Gates Work To Level Any Ridges At The Outside Edges Of The Working Width!
• Parking Stand & Rear Ridge Leveling Plates Are Standard.
• Power Harrow Includes a 1-3/8", 6 Spline 540RPM, Shear Bolt Protected PTO Shaft!
• Power Harrow & Seeder Ships Fully Assembled & Ready To Use!.
• Do it ALL in 'One Efficient Pass'. Keep Hours Off Your Expensive Tractor, Reduce Fuel Consumption, Reduce Maintenance Intervals, and Most Importantly, Recover Your Personal Time!
• Multi-Speed Heavy Duty Gearbox Provides The Best Combination of Maximum Tractor Efficiency with The Best Single Pass Results!
• Heavy Duty Side Plates:
• Vertically Adjustable to Reduce Resistance & Wear When Using Deep Tillage Applications.
• Laterally Hinged To Allow Rocks/Debris To Escape & Prevent Lodging & Spring Tensioned For Return.
• 'On-The-Fly' Working Depth Adjustment With Hydraulically Adjusted XW (Extra-Wide) Packer Roller:
• XW (Extra Wide) Packer Roller Eliminates Soil Ridges From Being Left Behind The Side Plates.
• Packer Roller Also Provides Soil Conditioning.
• Greaseable Top Rotor Hub Bearings, With Oil Bath Lubrication For Bottom Rotor Hub Bearings!
• Easy Top Access Rotor Hubs.
• 2 Blades Per (Round) Blade Carrier.
• Heavy Duty Clevis Style Pull Arm Hitches.
• Power Harrow Ships Complete Including a 540RPM, Shear Bolt Protected PTO Shaft!
• Upgrade To 1000RPM Gearbox Available Separately.

SEEDER STANDARD FEATURES:

• Hopper Capacity:
• 230P: 8.2Bu Hopper
• 250P: 9.2Bu Hopper
• 300P: 10.5Bu Hopper
• Two Top & Two Bottom Sight Glasses.
• Suitable For Most All Seed Types, From Alfalfa to Corn & Beans.
• Not Recommended For Warm Season Grasses.
• 230P:
• 16 Individual Drops Within 90" Wide Plate:
• Hopper Has 16 'Port Openings' With Slide Gates (attached to Hopper) Which Are Individually Adjustable For Flow Control To Accommodate Various Seed Sizes & Types.
• These 'Port Openings' Flow Into 16 Individual Seed Hoppers (white plastic wedge shaped) With Rotating 'Seed Selectors'. 'Seed Selector's' Are Individually Adjustable For Seed Size.
• 250P:
• 18 Individual Drops Within 102" Wide Plate:
• Hopper Has 18 'Port Openings' With Slide Gates (attached to Hopper) Which Are Individually Adjustable For Flow Control To Accommodate Various Seed Sizes & Types.
• These 'Port Openings' Flow Into 18 Individual Seed Hoppers (white plastic wedge shaped) With Rotating 'Seed Selectors'. 'Seed Selector's' Are Individually Adjustable For Seed Size.
• 300P:
• 20 Individual Drops Within 102" Wide Plate:
• Hopper Has 20 'Port Openings' With Slide Gates (attached to Hopper) Which Are Individually Adjustable For Flow Control To Accommodate Various Seed Sizes & Types.
• These 'Port Openings' Flow Into 20 Individual Seed Hoppers (white plastic wedge shaped) With Rotating 'Seed Selectors'. 'Seed Selector's' Are Individually Adjustable For Seed Size.
• After These Individual Hopper 'Port Openings' & 'Seed Selectors' (In The Wedge Shaped Seed Hoppers) Have Moved & Sorted The Seeds, The Seeds Flow Into Each Drop Tube For Placement Into The Beautiful Seedbed made by The Tiller, Then The Hydraulically Controlled Packer Roller Follows To Ensure Excellent Ground Contact For Maximum Germination!
• Handle At Right End Of Hopper Opens & Closes Seed Flow at The bottom Of Each Wedge Shaped Seed Hopper.
• Handle At Left End Of Hopper Provides Speed Control For Seeding Rate.

ACMA Power Harrow, Packer Roller + Seeder Tilling & Seeding Into a Field of Spring Field Grasses & Weeds.

Emergent Stand of Early Rye.

Mature Stand of Resultant Rye.

ACMA Power Harrow, Packer Roller + Seeder Tilling & Seeding Into Chisel Plowed Ground.


ACMA Model E200 Power Harrow, Packer Roller + Seeder Combo on a 57HP LS Utility Tractor.

‘R’ SERIES POWER HARROW & SEEDER SPECIFICATIONS
MODEL	R250	R300	300P
Tractor Horsepower (PTO)	65 - 130HP	80 - 130HP	100 - 130HP
PTO Speed	540 RPM
Hitch/Hitch Category	Clevis Style, CAT 2, QH Compatible
Working Width	7'-9"	8'-6"	10'-2"
Overall Width	8'-9"	9'-10"	11'-6"
Rotor	10 Flanges & Total of 54+2 Straight Blades	11 Flanges & Total of 60+2 Straight Blades	12 Flanges & Total of 72+2 Straight Blades
	6 Blades Per Flange on 8 Center Flanges	6 Blades Per Flange on 9 Center Flanges	6 Blades Per Flange on 11 Center Flanges
	3 Blades Per Flange on 2 Outside Flanges, Plus The Standard & Straight Blades Noted Above!
Blade Tip to Blade Tip Diameter, Rotor	21.25"
Max. Working Depth	10"
Rear Packer Roller Diameter	18"
Weight	2,770 lbs.	3,150 lbs.	3,840 lbs.
Weights are Less Pallets, Crates, PTO Shaft & Roller.

Specifications & Designs Are Subject to Change Without Notice