|
|
|
|
FLAIL MOWER GENERAL FEATURES:
-
This ACMA Flail Mower Has 22 Forged & Hardened Steel Hammer Blades- ACMA Flail Mowers Always Have the Highest Population of Blades To Provide The Best Possible Cut & Reduce The Burden on Your Tractor!
-
ACMA Mower Gearboxes Include An Over-Running Clutch, Which Provides Two Advantages:
-
Rear Roller Provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-6").
-
Under Deck, Serrated Mulching Counter Blade Ensures Reduction of Larger Clippings & Further Reduces the Smaller Ones.
-
Multiple Advantages Of This Offsetable Flail Mower with Side Trim Head, Over Static, Center Mounted 3-Point Mowers:
-
If You're Mowing Along a Fenceline, Treeline, Building, Etc., Instead Of Getting Your Entire Tractor Along Side Of The Fence Or Building (and Risk Scraping Your Tractor Tires or Snagging & Damaging Trees, Posts, Fencing, Buildings, Etc.), You Can Simply Keep The Offset Part Of The Mower Close To The Edges You Want To Mow And Prevent Any Damage To The Tractor Or the Trees, Fencing, Walls, Etc. Snagging Posts, Trees Or Other Secured Objects Can Also Damage The 3-Point Linkage On The Mower Or Even The Pull Arms & Top Link Of Your Tractor.
-
Much Better Visibility: If The Edge Of Any Mower Is Flush With The Sidewall Of Your Tractors Tire, Forget About Visibility! You Will Be Cutting With Your Tractor Tire As A 'Guide', Which is OK In Open Areas, But Again, When You're Mowing Up Against Obstacles, You Want Visibility, And The Offset Feature Will Provide That. It Will Also Eliminate The Need To Look Back Over Your Shoulder To See The Mower Deck. A Simple Glance To Your Right Gives You Visibility Of The Outer Mowing Edge.
-
The Multi-Purpose Characteristic of ACMA Flail Mowers Provides a 'Rough Cut' That's Superior to Any 'Rotary Rough Cut Mower', and a 'Finish/Manicure Cut' That's Superior to Any 'Rotary Finish Mower'! Plus with the 'Forged & Hardened' Hammer Blades, You Can Cut 3"-4" Diameter Material & Still Get a Superior Finish Cut Too!
-
ACMA Flail Mowers Are The Safest & Most Efficient Mowers Available:
-
With ACMA Flail Mowers, The Possibility Of Discharging Dangerous Projectiles Is Dramatically Reduced Compared To Conventional Rotary Mowers, And With The Reduced Deck Depth & Weight, They're The Easiest For You & Your Tractor To Handle! Plus, The Superior 'Single-Pass' Cut Of ACMA Flail Mowers Provides New Efficiencies By Eliminating Multiple Passes For Excellent Results!
-
Powder Coated Paint!
-
Tractors Shown in Sample Images for Reference Only & Not Included.
-
Sample Photos are of the HD250 for Reference Only!
-
Mower & Side Trim Assembly Ships Fully Assembled & Ready To Use. This Means No Poor Instructions, No Missing Parts & Associated Delays, No Special Tools, No Knucklebusters & No Waiting Until It's Assembled Before First Use!
-
ACMA Products Are Made In Italy & Assembled In The USA!
-
Mower Includes 540RPM PTO Shaft.
SIDE TRIMMER GENERAL FEATURES:
-
Side Trim Mower Head is Powered by an Efficient & Convenient, Pre-Plumbed & Self-Contained Hydraulic System, Accommodating Tractors w/o Outlets & Eliminating Loose Hoses to Plug In, and Issues with Varying Hyd. Flow Rates & Hose Tips.
-
The ACMA Side Trim Mower Has 2 Solid Steel Swinging Blades (attached to a pan carrier) To Provide The Best Possible Cut!
-
Swing Responsiveness is Adjustable with the Antenna Trip Wire Setting Which can be Set From Sensitive to Rigid for Varied Applications. The Distance of the Antenna From the Trimming Head in Relation to the Object is Also Adjustable for Varied Reaction Times.
-
Swing Tension Can be Mild For Fragile Stems, Trunks & Posts, or Rigid For Faster Ground Speed, and Also For Steep, Uphill Travel!
-
Side Trim Mower Ships With Attaching Brackets, Hydraulic Hoses & Couplers.
FLAIL MOWER SPECIFICATIONS:
-
Rated for 40 to 100HP Tractors.
-
Suitable for Cat 1 & 2, 3-Point Hitches:
-
Quick Hitch Compatibility is Cat 1 & 2!
-
Hydraulically Offset: 24" Right, 3" Left.
-
Deck Mowing Width: 79".
-
Deck Overall Width: 87".
-
Overall Mowing Width w/Side Trimmer: 103".
-
Overall Width: Deck & Side Trim Head Hyd. Retracted 89".
-
Overall Width: Deck & Side Trim Head Hyd. Extended 111".
-
Overall Depth: Deck 48" + 25" For Side Trim Head.
-
Deck is 1/4" Thick & Double Skinned From the Front Bottom to the Rear of the Top.
-
Electronically Balanced Rotor Has 22, Forged & Hardened Steel Hammer Blades.
-
Quad Belt Driven Rotor.
-
Rotor Speed: 2200RPM's.
-
Blade Tip Speed: 96mph.
-
Blade Swing Diameter: 17".
-
Rotor & Blades Rated to Cut 4" Diameter Material.
-
Heavy Duty Hammer Blades Weigh 3lb's Each!
-
Rear Roller Diameter: 6".
-
Weight 1,450lb's (Less Reservoir Hyd Fluid, PTO Shaft, Pallet/Crating, etc.).
-
Specifications Are Based on Manufacturer Provided Data & Subject to Change.
SIDE TRIMMER SPECIFICATIONS:
-
Mowing Width: 26".
-
Overall Diameter is 28" Including a 1" Rubber Bumper Around the Outer Circumference.
-
Outside Edge/Max Reach of the Trimmer Head From Edge of Flail Mower Deck is About 24".
-
Blades are 5/16" Thick x 2-3/8" Wide x 7-1/8" Long.
-
Blades are Sharpenable & Always In Stock.
-
Mower Head Speed: 2400RPM's.
-
Rotor & Blades Rated To Cut 2" Diameter Material.
-
Weight: 225lb's w/Hoses, Couplers (Less Pallet/Crating).
-
Specifications Are Based on Manufacturer Provided Data & Subject to Change.
|
|
|
|
|
|
|